GW Instek GDS-200 Series Programming Manual - Manual (Page 82)

GDS-200 & GDS-300 Programming Manual
82
Example :MEASUrement:MEAS1:SOURCE1
CH1
Returns the (first) source for measurement 1.
:MEASUrement:MEAS<X>:TYPe
Description Sets or queries the measurement type for a selected
automatic measurement. This is a statistics related
command.
Syntax :MEASUrement:MEAS<X>:TYPe
{PK2pk | MAXimum | MINImum | AMPlitude | HIGH |
LOW | MEAN | CMEan | RMS | CRMs | AREa | CARea |
ROVShoot | FOVShoot | RPReshoot | FPReshoot |
FREQuency | PERIod | RISe | FALL | PWIdth | NWIdth |
PDUTy | PPULSE | NPULSE | PEDGE | NEDGE
| FRRDelay | FRFDelay | FFRDelay | FFFDelay |
LRRDelay | LRFDelay | LFRDelay | LFFDelay | PHAse
| ?}
Related
commands :MEASUrement:MEAS<X>:SOURCE<X>
Parameter MEAS<X> The automatic measurement number
from 1 to 4.
Return parameter Returns the measurement type
Example :MEASUrement:MEAS1:TYPe RMS
Sets measurement 1 to RMS measurement.
:MEASUrement:MEAS<X>:VALue
Description Returns the measurement results for the selected
measurement. This is a statistics related command.
Syntax :MEASUrement:MEAS<X>:VALue?
Related
Commands :MEASure:SOURce<X>
:MEASUrement:MEAS<x>:TYPe
Set
Query
Query