GW Instek GDS-200 Series Programming Manual - Manual (Page 67)

COMMAND DETAILS
67
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the overshoot.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:ROVShoot?
5.00E+00
Selects Channel 1, and then measures the rise
overshoot.
:MEASure:FOVShoot
Description Returns the fall overshoot amplitude.
Syntax :MEASure:FOVShoot?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the fall overshoot as a
percentage
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FOVShoot?
1.27E+0
Selects Channel 1, and then measures the fall
overshoot.
Query