GW Instek GDS-200 Series Programming Manual - Manual (Page 47)

COMMAND DETAILS
47
Parameter <NRf> Horizontal Position
Return parameter Returns the cursor position.
Example :CURSor:H2Position 1.5E-3
Sets the H2 cursor position to 1.5ms.
:CURSor:HDELta
Description Returns the delta of H1 and H2.
Syntax :CURSor:HDELta?
Return Parameter <NR3> Returns the distance between two
horizontal cursors.
Example :CURSor:HDELta?
5.0E-9
Returns the horizontal delta as 5ns.
:CURSor:V1Position
Description Sets the first vertical cursor (V1) position.
Syntax :CURSor:V1Position {<NRf>| ?}
Parameter <NRf> Vertical position. Depends on the
vertical scale.
Return parameter <NR3> Returns the cursor position.
Example :CURSor:V1Position 1.6E -1
Sets the V1 cursor position to 160mV.
:CURSor:V2Position
Description Sets the first vertical cursor (V2) position.
Syntax :CURSor:V2Position {<NRf> | ?}
Parameter <NRf> Vertical position. Depends on the
vertical scale.
Query
Set
Query
Set
Query