GW Instek GDS-200 Series Programming Manual - Manual (Page 68)

GDS-200 & GDS-300 Programming Manual
68
:MEASure:RPReshoot
Description Returns rising preshoot over the entire waveform
in percentage.
Syntax :MEASure:RPReshoot?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the rising preshoot.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:RPReshoot?
2.13E-2
Selects Channel 1, and then measures the rise
preshoot.
:MEASure:FPReshoot
Description Returns fall preshoot amplitude.
Syntax :MEASure:FPReshoot?
Related
Commands :MEASure:SOURce<X>
Returns Returns the fall preshoot as <NR3>.
Return parameter <NR3> Returns the fall preshoot as a percentage.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Query
Query