GW Instek GDS-200 Series Programming Manual - Manual (Page 84)

GDS-200 & GDS-300 Programming Manual
84
:MEASUrement:MEAS<X>:MEAN
Description Returns the mean measurement results for the
selected measurement from the last time the
statistics were reset. This is a statistics related
command.
Syntax :MEASUrement:MEAS<X>:MEAN?
Related
Commands :MEASUrement:STATIstics:MODe
Parameter MEAS<X> The automatic measurement number
from 1 to 4.
Example :MEASUrement:MEAS3:SOUrce1 CH1
:MEASUrement:MEAS3:TYPe PK2PK
:MEASUrement:STATIstics:MODe ON
:MEASUrement:MEAS3:MEAN?
2.090E-02
Returns the mean measurement result for
measurement number 3.
:MEASUrement:MEAS<X>:MINImum
Description Returns the minimum measurement results for the
selected measurement from the last time the
statistics were reset. This is a statistics related
command.
Syntax :MEASUrement:MEAS<X>:MINImum?
Related
Commands :MEASUrement:STATIstics:MODe
Parameter MEAS<X> The automatic measurement number
from 1 to 4.
Query
Query