GW Instek GDS-200 Series Programming Manual - Manual (Page 87)

COMMAND DETAILS
87
Reference Commands
:REF<X>:DISPlay ......................................................... 87
:REF<X>:TIMebase:POSition ..................................... 87
:REF<X>:TIMebase:SCALe ......................................... 88
:REF<X>:OFFSet ......................................................... 88
:REF<x>:SCALe ........................................................... 89
:REF<X>:DISPlay
Description Sets or queries a reference waveform to be shown
on the display. A reference waveform must first be
saved before this command can be used.
Syntax :REF<x>:DISPlay { OFF| ON| ? }
Parameter <X> Reference waveform 1, 2
OFF Turns the selected reference
waveform off
ON Turns the selected reference
waveform on
Return parameter Returns the status of the selected reference
waveform. (OFF, ON)
Example :REF1:DISPlay ON
Turns on reference1 (REF 1) on the display.
:REF<X>:TIMebase:POSition
Description Sets or returns the selected reference waveform
time base position.
Syntax :REF<X>:TIMebase:POSition { <NRf> | ?}
Related
commands :REF<X>:DISPlay
Set
Query
Set
Query