GW Instek GDS-200 Series Programming Manual - Manual (Page 69)

COMMAND DETAILS
69
Example :MEASure:SOURce1 CH1
:MEASure:FPReshoot?
Selects Channel 1, and then measures the fall
preshoot.
:MEASure:FREQuency
Description Returns the frequency value.
Syntax :MEASure:FREQuency?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the frequency in Hz.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:FREQuency?
1.0E+3
Selects Channel 1, and then measures the
frequency.
:MEASure:PERiod
Description Returns the period.
Syntax :MEASure:PERiod?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the period.
Chan Off Indicates the source channel is not
activated.
Query
Query