GW Instek GDS-200 Series Programming Manual - Manual (Page 125)

COMMAND DETAILS
125
BACKward Moves to the previous waveform in
memory
<NRf> Sets the current waveform number.
The waveform number must be equal
to or less than the total number of
waveforms, as returned by the
REPLAY:TOTalnum?
query.
Example REPLAY:TOTalnum?
8.960E+02
REPLAY:CURRent 100
REPLAY:TOTalnum?
1.000E+02
Indicates that there are a total of 896 waveforms.
Set the current waveform to #100. The return value
(100) indicates that the current waveform is #100.
Rotate Commands
The rotate function sets the screen orientation.
:ROTATE ....................................................................125
:ROTATE
Description Sets or queries the screen orientation.
Syntax :ROTATE { PORTrait | LANDscape | 0 | 1 | ? }
Parameter/Return
parameter PORTrait / 0 PORTrait
LANDscape / 1 LANDscape
Set
Query