GW Instek GDS-200 Series Programming Manual - Manual (Page 63)

COMMAND DETAILS
63
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the global low value.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:LOW?
1.00E-0
Selects Channel 1, and then measures the low
current/voltage.
:MEASure:MEAN
Description Returns the mean voltage/current of one or more
full periods.
Syntax :MEASure:MEAN?
Related
Commands :MEASure:SOURce<X>
Return parameter <NR3> Returns the mean.
Chan Off Indicates the source channel is not
activated.
Note Before using this command, select the
measurement channel. See the example below.
Example :MEASure:SOURce1 CH1
:MEASure:MEAN?
1.82E-3
Selects Channel 1, and then measures the mean
value.
Query