Jenway Genova Nano German - Manual (Page 75)

The settings menu is accessed through the operating menu
by pressing the key adjacent to the settings icon. In the
settings menu press the key below the wavelength icon.
This will open a number entry screen. Use the keys at the
bottom of the screen to select the digit to be adjusted.
Use the keys adjacent to the arrow icons to increase or
decrease the wavelength to the required number. Press
the key adjacent to the tick icon to save the changes and
return to the settings menu.
16.2.2 Settings
The settings menu enables the wavelength, resolution, standard, factor, instrument factor or dilution
factor to be set and is accessed from the operating menu by pressing the key adjacent to the settings
icon. Once all of the required settings have been entered press the key adjacent to the tick icon to save
and return to the operating menu.
Fig 16.2.2.1 – Settings Menu
When setting the method parameters either the standard or the factor should be selected. The standard
should be used if the factor is not known as selecting this option will calculate the factor. If the factor is
known it is not necessary to measure a known standard’s concentration. When the standard or factor is
not selected the value should be set to 1.00.
16.2.2.1 Using a Standard
The standard menu enables the value of a standard to
be entered. This function is accessed by pressing the key
adjacent to the standard icon. This opens the extended
number entry screen. Use the keys at the bottom of the
screen to select the digit to be changed. The key below the
digits must be pressed twice to select the adjacent digit.
For example 00 the first press of the key alters 10, the second press alters 01. Use the keys adjacent
to the arrow icons to increase or decrease the selected number. Standard values from 0.001e-19 to
Setting the
dilution factor
Tick icon
Standard menu
Instrument factor menu
Factor menu
Select wavelength
73