Jenway Genova Nano German - Manual (Page 85)

17.6 DELETING RESULTS
Results can only be deleted if a valid USB memory stick is inserted into the front of the instrument.
In the operating menu press the key adjacent to the USB
memory stick icon to open the results selection menu.
Select the result to be deleted by pressing the key adjacent
to the result. Press the key below the delete icon.
Confirmation will be needed to delete the selected result;
press the key adjacent to the tick icon to confirm deletion.
Press the key adjacent to the cross icon to cancel and return
to the results selection menu.
17.7 PRINTING
The utility toolbar in the operating menu enables results
to be printed and print setup options to be set. The print
setup menu enables the destination of the printouts and
language of the printouts to be set. Depending on the
measurement mode the printouts can be customised to
print off post analysis statistics.
17.7.1 Print Setup
To open the print setup menu hold the key adjacent to the
printer icon for 2 seconds in the operating menu.
To select the language for the printouts press the key
adjacent to English icon. Repeat pressing of the key cycles
the language between English, Français, Deutsche, Espânôl
and Italiano.
The destination of the printouts can be the internal printer or an external serial printer. The results can
only be sent to an external serial printer if there is a serial printer connected to the instrument via the
RS232 serial port. Press the key adjacent to the computer icon to select the external serial printer. The
results can only be sent to the internal printer if there is an internal printer connected. To select the
internal printer for the printout destination press the key adjacent to the printer icon.
Operating Menu
83