Martel Electronics 3001 User Manual
Page 34
Advertising
7.3 V/I Transmitter
Figure 22 - V/I Transmitter Application
1.
Disconnect any test leads from external devices.
2.
Select voltage output on the primary display as described in section 4.1
3.
Select current input on the isolated display as described in section 5.2. Select the
isolated loop power option.
4.
Connect the transmitter as shown in figure 22.
5.
Test and calibrate the transmitter per the manufacturer's instructions.
7.4
RTD Test
Figure 23 - RTD Test Application
30
Advertising