Martel Electronics 3001 - Manual (Page 5)

1. Introduction
The Martel series 3001 calibrator is an accurate full-featured temperature, pressure and
DC calibrator intended for R & D, manufacturing and calibration lab applications. The
unit's simple design and ease of operation allow users to quickly familiarize themselves
with its operations and features. Time saving functions like the ability to save, recall and
automatically cycle through setpoints for each output range, the ability to enter user
definable RTD curves, and a complete remote interface are several key features offered
by the 3001.
1.1 Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023 Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Drive
Derry, NH 03038
1.2 Standard Equipment
• Power cord
• Thermocouple shorting jumper
1.3 Options and Accessories
• IBP-2 PT100 High Accuracy Probe
• 80029 JKTE Thermocouple Kit
• 80036 RSNB Thermocouple Kit
• PTL-1 Low EMF Beryllium Copper Test Leads
The 3001 and above options are available in a complete kit form.
1.4 Unpacking
Upon receipt of the shipment, inspect the container and equipment for any signs of
damage. Take particular note of any evidence of rough handling in transit. Immediately
report any damage to the shipping agent.
NOTE: The carrier will not honor any claims unless all shipping material is saved for their
examination.
After examining and removing the contents, save the packing material and carton in the
event that re-shipment is necessary.
Remove the Packing List and verify that all of the listed equipment has been received. If
there are any questions about the shipment, please call Martel Electronics at 1-800-821-
0023.
Check to see if your basic calibrator package is complete. It should include:
• 3001 Calibrator
• Instruction Manual
1