Martel Electronics 3001 User Manual
Page 80
Advertising
ZERO_MEAS?
IEEE-488
RS-232
Sequential
Overlapped
This command returns the zero offset for pressure modules, thermocouple millivolts, or
RTD ohms.
Parameter:
<None>
Response: <zero
offset>,<units>
where < zero offset > is the current offset.
and where <units> is one of the following:
OHM
Ohms
V
DC volts (thermocouple millivolts)
or
one of the pressure units listed with the PRES_UNIT?
command
Example:
ZERO_MEAS?
1.060000E-01,PSI
This example indicates that the pressure zero for the attached module
is 0.106 psi.
X
X
X
76
Advertising