West Control Solutions Pro-4 - Manual (Page 75)

cUL certification
(Type 4x, indoor use)
For compliance with cUL certificate,the follow-
ing information must be taken into account:
w Use only 60 / 75 or 75°C copper (Cu) wire.
w Tighten the terminal- screws with a torque
of 0,5 - 0,6 Nm
Ambient temperature: ≤ 40°C
Power supply: ≤ 250 V AC
Electrical connections
w flat-pin terminals 1 x 6,3mm or 2 x 2,8mm to
DIN 46 244 or
w screw terminals for 0,5 to 2,5mm²
On instruments with screw terminals, the
insulation must be stripped by min. 12 mm.
Choose end crimps accordingly.
Mounting
Panel mounting with two fixing clamps at top/ bot-
tom or right/left, high-density mounting possible
Mounting position: uncritical
Weight: 0,27kg
Accessories delivered with the unit
Operating manual
Fixing clamps
Technical data
KS 90-1 / KS 92-1 75