Badger Meter M-Series M4000 - Manual (Page 18)

18
Switch/Buttons (+ and -)
Select/Press + to:
· move text up by one line, relative to the on screen
arrow, for each select/press when choosing menu
or sub-menu list names
· move text up by one line, relative to the arrow, for
each select/press when selecting a parameter
setting from a list
· increase a number by one digit for each select/
press when inputting parameter numeric settings
Select/Press – to:
· move text down by one line, relative to the on
screen arrow, for each select/press when choosing
menu or sub-menu list names
· move text down by one line, relative to the arrow,
for each select/press when selecting a parameter
setting from a list
· decrease a number by one digit for each select/
press when inputting parameter numeric settings
E Switch/Button
Select/Press E to:
· To enter (open) a menu or sub-menu topic at which
the arrow is pointing.
· Select between ON/OFF parameter settings for
each select/press.
· Move the parameter numeric setting underscore
( _ )one place to the right for each select/press
when inputting parameter numeric settings.
· SAVE a parameter numeric setting. After all
numbers are input, press E and the setting is
saved, the screen closes and the previous screen
with the arrow pointing at "Exit this Menu" shows
again. Select E again. That screen closes and the
previous screen appears with the arrow pointing at
its “Exit this Menu”.
· Continue selecting E to return to the Main Screen.
· If your amplifi er is not password protected, pressing
E from the Main Screen accesses the MAIN MENU.
The MAIN MENU is a list that provides access to all
amplifi er menus and parameters.
· If your amplifi er is password protected and E is
pressed from the Main Screen, the PASSWORD
screen opens (reference PASSWORD??? 01,
below).
How to Program
Amplifi er screens, menus and program parameters are
arranged in the familiar “branching” format where the MAIN
MENU screen is a list of selections. The Main Menu list
provides access to other lists, selections or parameter
screens which provide input for meter programming.
The amplifi er program uses three types of screens; a List
screen, an Input Numbers screen and a select ON or Off
screen.
MAIN MENU 00
----------------
>Exit this Menu
Meter Setup
Measurements
Inputs/Outputs
Clear Totals
Communications
Info/Help
Logout
l
Sample List Screen
Sample Input Numbers Screen
Sample Select ON or OFF Screen
The following pages introduce you to the screen formats,
describe how to maneuver to and through them and provide
some specifi cs about programming terminology and
parameters.
If possible, have access to your amplifi er display and controls
and perform these screen manipulations.
MAIN MENU
The MAIN MENU contains a list of eight selections and
an “Exit this Menu” choice. All amplifi er programming and
parameters are accessed from this list.