Badger Meter M-Series M4000 - Manual (Page 34)

34
Digital Input 1 Select function for input.
Digital Out. #1 Pulses / unit
Set for Forward pulse output.
Open collector Pulse width Set for Forward pulse output.
Transistor Set point min. Set for Flow Set Point output.
Set point max. Set for Flow Set Point output.
Output Type
Select N.O. or N.C. for any output function.
Select Function None
Fwd Pulse / AMR Forward flow pulse output.
AMR Forward flow pulse for AMR devices.
Flow Set Point Output will open or close based on set points.
Error Alarm Output will open or close during error conditions.
EmptyPipe Error
Output will open or close when the pipe is empty.
Flow Direction Output will open or close when flow direction changes.
Digital Out. #2 Pulses / unit Set for Reverse pulse output.
Open collector Pulse width Set for Reverse pulse output.
Transistor Full Scale Freq Set for Frequency output. Full scale = ? Hz
Preset Amount Set batch amount for Preset Output.
Set point min.
Set for Flow Set Point output
Set point max. Set for Flow Set Point output
Output Type Select N.O. or N.C. for any output function.
Select Function None
Reverse Pulse Reverse flow pulse output.
Freq. Output
Frequency out is proportional to rate of flow.
Preset Output Output will open or close when preset amount is reached.
Flow Set Point Output will open or close based on set points.
Error Alarm Output will open or close during error conditions.
EmptyPipe Error Output will open or close when the pipe is empty.
Flow Direction
Output will open or close when flow direction changes.
Digital Out. #3 Preset Amount Set batch amount for Preset Output.
Solid state relay Set point min.
Set for Flow Set Point output
Set point max.
Set for Flow Set Point output
Output Type Select N.O. or N.C. for any output function.
Select Function None
Preset Output Output will open or close when preset amount is reached.
Flow Set Point
Output will open or close based on set points.
Error Alarm
Output will open or close during error conditions.
EmptyPipe Error Output will open or close when the pipe is empty.
Flow Direction Output will open or close when flow direction changes.