Badger Meter M-Series M4000 - Manual (Page 19)

19
MAIN MENU 00
----------------
>Exit this Menu
Meter Setup
Measurements
Inputs/Outputs
Clear Totals
Communications
Info/Help
Logout
l
Only four lines of text are visible on the display screen.
Operating the + and – switches/buttons moves text up or
down and into view.
When an item from the list on the MAIN MENU is selected,
(press E when the item is in line with the arrow) either a
screen opens that requires an action such as select a size
or numeric unit for a parameter, turn a parameter on or off,
etc. or a screen with another list may open requiring another
selection be made to access and set a specifi c parameter
size, numeric unit or on/off confi guration.
Each screen has a name and number that displays at the
top of the screen. Write down screen names, numbers
and parameters that you access and change should other
changes be needed later.
NOTE: Your metering requirements may not require the use
of all screens, options and parameters.
MAIN MENU 00 is a typical List screen. It provides access
to parameter screens.
The MAIN MENU is a list of eight selections and an “Exit this
Menu” choice. All amplifi er programming and parameters are
accessed from this list.
1. Press + or – to position the arrow at a selection.
2. For example, press + once to place the arrow at Meter
Setup.
3. Next, press E.
4. Screen METER SETUP 10 opens.
METER SETUP 10 is another List screen. It provides
access to common meter parameters.
1. Maneuver the + or – magnetic switches or push buttons
to position the arrow at a selection.
2. For example, place the arrow at Pipe Dia. by pressing or
activating + button once.
3. Press E to open the Pipe Dia. screen.
4. Screen Pipe Dia. 11 opens.
PIPE DIA. 11 is another List screen. It requires a parameter
selection.
PIPE DIA. 11 is a list of pipe diameter sizes.
PIPE DIA. 11
---------------
Exit this Menu
6mm [1/4"]
8mm [5/16"]
10mm [3/8"]
15mm [1/2"]
20mm [3/4"]
25mm [1 "]
32mm [1 1/4"]
40mm [1 1/2"]
50mm [2"]
65mm [2 1/2"]
80mm [3"]
100mm [4"]
125mm [5"]
150mm [6"]
200mm [8"]
250mm [10"]
300mm [12"]
5. Press + or – to position the arrow at the appropriate
pipe size.