HP Hitachi Dynamic Link Manager Software User Manual
Page 152
3. Creating an HDLM Environment
130
dlmfdrv.unconf file (before editing) and Figure 3-5: Example of an /opt/
DynamicLinkManager/config/dlmfdrv.unconf file (after editing) show an
example of editing the HDLM driver unconfiguration definition file (
/opt/
DynamicLinkManager/config/dlmfdrv.unconf
).
Figure 3-4: Example of an /opt/DynamicLinkManager/config/dlmfdrv.unconf
file (before editing)
Figure 3-5: Example of an /opt/DynamicLinkManager/config/dlmfdrv.unconf
file (after editing)
The shaded portion indicates the text that was edited.
2.
Apply the contents of the HDLM driver unconfiguration definition file to the
HDLM driver configuration definition file.
Use the following command to apply the settings in the HDLM driver
unconfiguration definition file (
/opt/DynamicLinkManager/config/
dlmfdrv.unconf
) to the HDLM driver configuration definition file (
/kernel/
drv/dlmfdrv.conf
):
Execute the
dlmsetconf
utility for creating the HDLM driver configuration
definition file.
# /opt/DynamicLinkManager/bin/dlmsetconf -u
3.
Restart the host with the reconfiguration option specified.
Execute one of the following commands: