HP Hitachi Dynamic Link Manager Software - Manual (Page 346)

4. HDLM Operation
324
Figure 4-8: The /opt/DynamicLinkManager/config/dlmfdrv.unconf file (before
editing)
Figure 4-9: The /opt/DynamicLinkManager/config/dlmfdrv.unconf file (after
editing)
The shaded portion indicates the text to be edited.
Note
Do not edit anything other than deleting the hash mark (
#
) from the
beginning of the
LDEV
property line.
5. Apply the settings in the HDLM driver unconfiguration definition file (
/opt/
DynamicLinkManager/config/dlmfdrv.unconf
) to the HDLM driver
configuration definition file (
/kernel/drv/dlmfdrv.conf
).
Execute the following command:
# /opt/DynamicLinkManager/bin/dlmsetconf -u
6. If you are using VxVM, you need to release, from the VxVM disabled state, the
device that you want to remove from HDLM management.
Delete the target device from the
/etc/vx/vxvm.exclude
file.
Figure 4-10: Result output by executing the dlmvxexclude utility shows the
results output by executing the
dlmvxexclude
utility for assisting creation of the
VxVM configuration file and Figure 4-11: Coding in the /etc/vx/vxvm.exclude
file shows the coding in the
/etc/vx/vxvm.exclude
file.