HP Hitachi Dynamic Link Manager Software - Manual (Page 246)

3. Creating an HDLM Environment
224
numbers and devices.
The devices to be removed from VxVM are output to the
paths
section in the
execution result of the
dlmvxexclude
utility. For details about the
dlmvxexclude
utility, see 7.7 The dlmvxexclude Utility for Assisting Creation
of the VxVM Configuration File.
The following shows an example of executing the
dlmvxexclude
utility:
The shaded portion indicates the devices that need to be removed from VxVM.
2. Make an entry for the device you wish to removed from VxVM in the
paths
section of the
/etc/vx/vxvm.exclude
file.
In the
/etc/vx/vxvm.exclude
file, write the shaded portion of the execution
result of the
dlmvxexclude
utility shown in step 1. The settings will take effect
when the host is restarted.
Figure 3-26: Example of a description in the /etc/vx/vxvm.exclude (paths
section) shows an example of such a description in the
/etc/vx/
vxvm.exclude
file.