HP Hitachi Dynamic Link Manager Software User Manual
Page 185
Advertising
3. Creating an HDLM Environment
163
of the SDS or SVM state database to the post-migration environment. In this
case, keep the pre-migration environment recognized by Solaris.
• Skip to step 21 if SDS or SVM is being used but you are not migrating a
replica of the SDS or SVM state database.
• Skip to step 21 if SDS or SVM is not being used.
18. Check the state database settings.
An example is shown below.
19. Add the post-migration boot disk to the SDS or SVM state database.
An example is shown below.
20. Delete the SDS or SVM state database replica that exists in the pre-migration boot
disk.
An example is shown below.
21. Perform the required settings if you want to mirror or multi-path the
post-migration boot disk in the following applications.
Advertising