HP Hitachi Dynamic Link Manager Software - Manual (Page 397)

6. Command Reference
375
Reference
Executing the
view
operation together with standard UNIX commands enables you to
filter the path information listed for a specific HBA port or CHA port. For details on
the
view
operation, see 6.7 view (Displays Information).
We recommend that you execute the following command and verify the information
on the target paths before you execute the
online
operation to place online all the
paths connected to a specific HBA port or CHA port.
Example 1
The following example shows how to filter and display the information on all
paths that pass through the HBA port whose host port number is
0004
and bus
number is
0000
.
# /opt/DynamicLinkManager/bin/dlnkmgr view -path | grep
0004.0000
The above command will display information on all the paths that pass through
the specified HBA port.
Example 2
The following example shows how to filter and display the information on all
paths that pass through the CHA port
0A
of the Thunder 9500V Series:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname |
grep 9500V | grep 0A
The above command will display information pertaining to only those paths that
pass through the specified CHA port.