HP Hitachi Dynamic Link Manager Software - Manual (Page 357)

4. HDLM Operation
335
Execute the following command:
# /usr/cluster/bin/scdidadm -r
19. Notify the node of the most recent device ID information.
Execute the following command:
# /usr/cluster/bin/scdidadm -ui
20. Update the Sun Cluster global device namespace.
Execute the following command:
# /usr/cluster/bin/scgdevs
21. When using an HDLM-managed device, as a Quorum device, set the Quorum
device on any node in the cluster.
The following shows examples of executing the commands:
Check the device ID of the HDLM device:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
# /usr/cluster/bin/scdidadm -L
Set up the Quorum device:
# /usr/cluster/bin/scconf -a -q globaldev=d4
Execute the following command to clear the install mode of a cluster when it
consists of two nodes:
# /usr/cluster/bin/scconf -c -q reset
22. Execute the following command to view the HDevName and iLU columns:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Check the correspondence between
HDevName
(the name of the logical device
file of the HDLM device) and
iLU
(the internal LU number) from the execution
results of the command, compare the correspondence with the correspondence