HP Hitachi Dynamic Link Manager Software - Manual (Page 196)

3. Creating an HDLM Environment
174
Table 3-22: Metadevice names
2. Create metadevices on the HDLM device, and then mirror them (single mirror).
# metainit -f d101 1 1 c8t50060E08000436D1d6s0
# metainit d100 -m d101
# metainit -f d201 1 1 c8t50060E08000436D1d6s1
# metainit d200 -m d201
# metainit -f d301 1 1 c8t50060E08000436D1d6s6
# metainit d300 -m d301
3. Set the boot block of the post-migration environment by specifying slice 0 (
/
(
root
) file system) after migration.
For example:
# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /
dev/md/rdsk/d100
4. Initialize the Solaris basic file system of the post-migration environment.
For example:
Boot disk File system Mirror Sub mirror
Current
/(root) d10 d11
d12
swap d20 d21
d22
/usr d30 d31
d32
After migration
/(root) d100 d101
d102
swap d200 d201
d202
/usr d300 d301
d302