HP Hitachi Dynamic Link Manager Software - Manual (Page 495)

7. Utility Reference
473
Legend:
Optional: If you omit the key name and value, the following value is used:
• For a new installation
The default is used.
• For an upgrade installation or re-installation
The previous setting value is inherited.
Note
Audit log settings are not supported.
#1
Only one key name and value can be specified on each line.
#2
Specifying an invalid value causes an error.
intermittent_error_
monitor
#3#4
Specify whether to enable
intermittent error monitoring by
specifying either of the following
values:
on
: Enable intermittent error
monitoring.
off
: Disable intermittent error
monitoring (default).
Optional Optional 3
intermittent_error_
monitor_interval
#4
Specify the interval for intermittent
error monitoring in minutes.
You can specify a value from
1
to
1440
. The default is
30
.
Optional Optional 4
intermittent_error_
monitor_number #4
Specify how many times an error
must occur to cause HDLM to
assume an intermittent error.
You can specify a value from
1
to
99
.
The default is
3
.
Optional Optional 2
Key name #1 Explanation #2 Required or optional? Maximum
length
(character
s)
Required
for new
installatio
n
Required
for
upgrade
installati
on or
re-install
ation