HP Hitachi Dynamic Link Manager Software - Manual (Page 424)

6. Command Reference
402
Use this parameter to display the model ID of the storage system in the
product ID element of the
DskName
field. When this parameter is omitted,
the command displays the product ID or emulation type of the storage system
instead.
For details about the information displayed for product IDs, see
Table 6-14: Product ID Displayed by the view -path Operation.
-iem
Use this parameter to add
IEP
to path information and display information
about intermittent errors.
-srt {pn|lu|cp}
Use this parameter to sort the list of path information in ascending order,
according to the specified sorting keys.
The sorting keys are as follows: the first sorting key is the name of the
storage system (
DskName
), the second sorting key is the value specified by
the
-srt
parameter, and the third sorting key is AutoPATH_ID.
The available parameter values to specify the second sorting key are:
•
pn
: Path name
•
lu
: LU number of the storage system
•
cp
: Port number of the CHA
When the
-srt
parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-hbaportwwn
Displays port WWN information for the HBAs connected to the storage
system.
-t
Omits the title for each information item.
Example
The following example shows how to display information about the paths
that access a host device.