HP Hitachi Dynamic Link Manager Software - Manual (Page 179)

3. Creating an HDLM Environment
157
The following shows an example of executing the command:
# metadb -d /dev/dsk/c0t0d0s7 /dev/dsk/c0t0d1s7 /dev/dsk/
c0t0d2s7
17. Make sure that the SDS or SVM state database replica that exists in the
pre-migration boot disk has been deleted.
The following shows an example of executing the command:
18. Back up the contents of both the pre-migration and post-migration environments.
Perform a backup so that you can take action in the following situations:
• Recover when an error occurs in the post-migration environment.
Boot from the pre-migration environment, and repair the post-migration
environment. The post-migration backup can be used to restore the
post-migration environment.
• Migrate from a boot disk environment to the local boot disk environment,
and return to the state before setting up the boot disk environment.