HP Hitachi Dynamic Link Manager Software - Manual (Page 336)

4. HDLM Operation
314
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,2
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
52a61,64
> ### Device=ssd73 target=65664 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9938,3
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
Execution example after a path is added by the addition of a CHA port:
Check that a path for the same CHA port has been added:
26a31,32
> ### Device=ssd119 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,2
28a35,36
> ### Device=ssd84 target=134012 lun=2
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,2
34a43,44
> ### Device=ssd118 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1,1/fp@0,0/
ssd@w50060e80033a9939,3
36a47,48
> ### Device=ssd83 target=134012 lun=3
> ### Path=/pci@8,700000/SUNW,emlxs@1/fp@0,0/
ssd@w50060e80033a9939,3
16. To remove an LU from HDLM management, use a text editor to edit the HDLM
driver unconfiguration definition file (
/opt/DynamicLinkManager/config/
dlmfdrv.unconf
).