HP Hitachi Dynamic Link Manager Software - Manual (Page 223)

3. Creating an HDLM Environment
201
press the Enter key.
A screen to set the size of the integrated trace file appears. The current value is
displayed in Current Size(KB).
2. Enter the desired size in New Size(KB).
You can specify a value from 8 to 8192 (KB). The default value is 256. Set this
to a value larger than the buffer value set in step 2 of 3.11.5 Changing the Buffer
Size Per Monitoring Interval Duration. The recommend value is 4096 for
collecting an integrated trace.
If you do not want to change the integrated trace file size, leave New Size(KB)
blank, type
!
, and then press the Enter key to return to the Hitachi Network
Objectplaza Trace Library setup menu.
3. Press the Enter key.
The new setting is applied and the Hitachi Network Objectplaza Trace Library
setup menu appears again.
3.11.4 Changing the Number of Integrated Trace Files
To change the number of integrated trace files:
1.
In the Hitachi Network Objectplaza Trace Library setup menu, type
2
and then
press the Enter key.
A screen to set the number of integrated trace files appears. The current value is
displayed in Current Number(KB).
2. Enter the desired number in New Number(KB).