HP Hitachi Dynamic Link Manager Software - Manual (Page 253)

3. Creating an HDLM Environment
231
Figure 3-28: The /etc/vx/vxvm.exclude file (after editing)
Among the non-HDLM devices in the
ENABLED
state, there might be two or more
devices whose
t
X
d
Y portions in the logical device file name (
c
U
t
X
d
Y
s2
format)
are the same. In this case, change the currently assigned controller number in
/
etc/vx/vxvm.exclude
.
5. After modifying all the sd or ssd device entries that have not been suppressed in
/etc/vx/vxvm.exclude
, execute the
vxdctl
command to restart the VxVM
daemon.
The following shows an example of executing the command:
# vxdctl enable
6. Execute the
vxdmpadm
command, specifying a device output by the
vxdisk
command, to check whether the device has been removed from VxVM.
If the
STATE
column shows
DISABLED
, the device has been removed from
VxVM. The following shows an example of executing the command: