HP Hitachi Dynamic Link Manager Software - Manual (Page 438)

6. Command Reference
416
In the sub-parameters,
-hdev
or
-pathid
, you can filter the LU information to
be displayed. If you omit both parameters, the command displays the information
about all the LUs recognized by HDLM.
For details on the contents of each displayed item, see Table 6-17: Displayed LU
Information.
The following shows the sub-parameters:
-hdev
host-device-name
Filters the information only for the LUs corresponding to the specified host
device.
Specify the name of the logical device file (minus the slice number, in
c
U
t
X
d
Y format) for the HDLM device to indicate the desired host device.
The host-device-name string is case-sensitive.
-pathid
AutoPATH_ID
Use this parameter to display only the information about the LU that is
connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example
The following example shows how to add SLPR, PathName, ChaPort,
CLPR, Type, IO-Count, IO-Errors, DNum, IEP, and Physical Device to the
displayed items for LU information.
Type type
IO-Count ic
IO-Errors ie
DNum dnu
IEP iep
Physical Device pd
All items are displayed
all
Item that can be added Sub-parameter