HP XP Command View Advanced Edition Software - Manual (Page 140)

Command line interface commands
140
externalVolume=0
differrentialManagement=false
SnapshotPoolID=-1
journalPoolID=-1
thpType=-1
consumedCapacityInKB=-1
thpPoolID=-1
threshold=-1
tcaPoolID=-1
.
. (repeated for other ReplicationInfo instances)
.
***** : The values are encoded by the CLI.
4-4-18 ModifyArrayReservation
ModifyArrayReservation extends the period of time that can elapse before the target storage
subsystem is unlocked (see Table 4-49 ). Reservation affects only Storage Array Commands and
LUN Commands. GetStorageArray can be executed for subsystems reserved by another user.
The commands listed in section
4-4-1 can be performed under your reservation. If the configuration
is not changed and ModifyArrrayReservation is not executed, the reservation will expire in five
minutes. If ModifyArrrayReservation is executed, the period of time is reset again to expire in
five minutes.
A user who has only View permission cannot execute this command. A user to whom user-defined
resource groups are assigned and who also has Modify permission can specify only storage
subsystems containing accessible LDEVs. If any other storage subsystems are specified, an error
occurs.
NOTE: A Local System Administrator or Local Storage Administrator can specify only storage
subsystems containing accessible LDEVs. If any other storage subsystems are specified, an error
occurs.
Table 4-49 ModifyArrayReservation command parameters
Parameter Name Status Description
model Required Model of the storage subsystem
serialnum Required Serial number of the storage subsystem
Command execution example:
hdvmcli ModifyArrayReservation -o "D:\logs\ModifyArrayReservation.log"
"model=XP12000" "serialnum=14009"
Command execution result:
An instance of ArrayReservation
objectID=*****
target=*****
loginID=dmuser
beginTime=1,039,003,476
***** : The values are encoded by the CLI.