HP XP Command View Advanced Edition Software - Manual (Page 239)

Command line interface commands
239
Table 4-114 Items output when instance is HostStorageDomain
Attribute Description
hostModeOption Host mode option
One of the following values is output for the XP24000/XP20000:
•
2 : VERITAS Database Edition/Advanced Cluster or VERITAS Cluster Server
4.0 is used.
•
6 : The value of the TPRLO parameter of the HBA mini-port driver is 2.
•
7 : Automatic recognition of LUNs
•
12 : LUNs without defined paths are hidden.
•
13 : Service information messages indicating the number of connection
failures between ports are reported.
•
23 : The host has shortened recovery time because data transfer failed.
One of the following values is output for the XP12000/XP10000/SVS200:
•
2 : VERITAS Database Edition/Advanced Cluster or VERITAS Cluster Server
4.0 is used.
•
6 : The value of the TPRLO parameter of the HBA mini-port driver is 2.
•
7 : Automatic recognition of LUNs12: LUNs without defined paths are hidden.
•
13 : Service information messages indicating the number of connection
failures between ports are reported.
•
14 : The P-VOL and the S-VOL of XP Continuous Access Synchronous
Software are clustered by using HP TruCluster.
•
19 : Hosts on which VMware is running can be used.
•
23 : The host has shortened recovery time because data transfer failed.
•
24 : The volume size is 2 TB or more.
•
27 : iSCSI connections can be used.
displayName Display name of the host storage domain
nickname Nickname of the host storage domain
4-10-14 Items output when instance is IPAddress
The IPAddress instance is output when the GetStorageArray
(subtarget=PortController) command (see section
4-4-17-17 ) is executed.
Table 4-115 describes the attribute of the IPAddress instance.
Table 4-115 Items output when instance is IPAddress
Attribute Description
ipAddress IP address of the port controller
This item is output when NAS is created.
4-10-15 Items output when instance is JournalPool
The JournalPool instance is output when the GetStorageArray (subtarget=JournalPool)
command (see section
4-4-17-9 ) is executed.
Table 4-116 lists and describes the attributes of the JournalPool instance.