HP XP Command View Advanced Edition Software - Manual (Page 208)

Command line interface commands
208
Modifying the debug level affects the amount of information written to the trace.log file, subsequent
to the change. The command does not affect the Device Manager server configuration files, so any
debug level modifications by this command does not affect the debug level when the server is
restarted.
A user to whom a user-defined resource group is assigned and who has only View permission
cannot execute this command.
Table 4-95 ModifyDebugLevel command parameters
Parameter Name Status Description
level Required New debug level (number between 0 and 4: 0=Full Debugging
trace, 1=Basic Information, 2=Warning, 3=Error, 4=Fatal)
Command execution example:
hdvmcli ModifyDebugLevel -o "D:\logs\ModifyDebugLevel.log" "level=0"
Command execution result:
RESPONSE
An instance of DebugLevel
value=0 [Full Debugging trace]
description=Debugging Trace
4-9 Replication commands
The Replication commands can be used to manage copy pairs.
4-9-1 AddConfigFileForReplication
AddConfigFileForReplication creates the HORCM configuration file for XP RAID Manager
(see parameters in Table 4-96 ). This file is required to create copy pairs for XP Business Copy
Software, XP Continuous Access Synchronous Software, XP Continuous Access Asynchronous
Software, XP Snapshot, and XP Continuous Access Journal Software.
XP Continuous Access Asynchronous Software can be used for XP24000/XP20000,
XP12000/XP10000/SVS200, XP1024/XP128, and XP512/XP48.
XP Continuous Access Journal Software can be used for XP24000/XP20000 and
XP12000/XP10000/SVS200.
A user who has only View permission cannot execute this command. A user to whom user-defined
resource groups are assigned and who also has Modify permission can specify the allowed
resources. If you specify resources that are not allowed, an error occurs.
NOTE: XP Continuous Access Asynchronous Software can be used for any HP XP Disk Array.
XP Snapshot can be used for XP12000/XP10000/SVS200.
Table 4-96 AddConfigFileForReplication command parameters
Parameter Name Status Description
groupname Optional Group name used in the RAID Manager
You can use a maximum of 31 bytes. You cannot specify a name that
begins with a hash mark (#) or hyphen (-).
When using Method 1, specify a group name that is specified in the
definition file.
NOTE: You must specify this parameter when you are using method 1.