HP XP Command View Advanced Edition Software - Manual (Page 74)

Command line interface commands
74
Table 4-19 AddStorageArray command parameters
Parameter Name Status Description
searchcommunity Optional
(for XP512/
XP48) SNMP Community string, used for identifying device elements via SNMP
(XP512/XP48 array)
Default is public.
userid Required
or optional
(for
XP1024/
XP128,
XP12000/
XP10000/
SVS200,
and
XP24000/
XP20000) User ID for accessing the storage subsystem
For XP24000/XP20000, XP12000/XP10000/SVS200, and XP1024/XP128,
specification of this parameter is required at initial identification.
When refreshing information, you can omit this parameter if the user ID
was not changed.
Command execution example: In this example, the CLI command accesses and detects the
storage subsystems in an array family (family: XP1024/128, IP address: 172.16.45.1). The
command specifies the user ID (root) and the user password (hdvm). Information about the
detected storage subsystems is registered in the Device Manager database.
hdvmcli AddStorageArray -o "D:\logs\XP1024 AddStorageArray.log"
ipaddress=172.16.45.1 family=XP1024/128 userid=root arraypasswd=hdvm
displayfamily=XP1024/128