HP XP Command View Advanced Edition Software - Manual (Page 245)

Command line interface commands
245
Table 4-117 Items output when instance is LDEV
Attribute Description
thpPoolID Pool ID of the XP Thin Provisioning Software
One of the following values is output for XP24000/XP20000:
When the LDEV is a THP volume: pool ID of the THP pool to which the THP
volume is assigned.
NOTE: When the THP volume has not been assigned to a THP pool, -1 is
displayed.
NOTE: When the operator is a partitioned storage administrator, -1 is displayed.
When the LDEV is a THP pool volume: pool ID of the THP pool that contains
the THP pool volume.
NOTE: When the operator is a partitioned storage administrator, -1 is displayed.
-1 is output for other volumes.
-1 is output for other storage subsystems.
threshold Usage rate threshold of the virtual volume
One of the following values is output for XP24000/XP20000:
When the LDEV is a THP volume: usage rate threshold value of the THP
volume
NOTE: When the THP volume is not assigned to a THP pool, -1 is displayed.
NOTE: When the operator is a partitioned storage administrator, -1 is displayed.
-1 is output for volumes other than THP volumes.
-1 is output for other storage subsystems.
systemDisk Indicates whether the LDEV is being used as a system disk.
One of the following values is output for XP24000/XP20000:
•
0 : Not being used as a system disk
•
1 : Being used as a system disk
•
-1 : Unknown
0 is output for other storage subsystems.
4-10-17 Items output when instance is LogicalDKC
The LogicalDKC instance is output when the GetStorageArray (subtarget=LogicalDKC)
command (see section
4-4-17-11 ) is executed.
Table 4-118 lists and describes the attributes of the LogicalDKC instance.
Table 4-118 Items output when instance is LogicalDKC
Attribute Description
logicalDKCNumber Logical DKC number
mfLogicalSerialNumb
er Serial number of the logical DKC recognized by a mainframe host