HP XP Command View Advanced Edition Software - Manual (Page 95)

Command line interface commands
95
Table 4-30 subinfo parameters that can be used together with the parameter subtarget
Value of the
parameter subtarget Specifiable
subinfo parameter Value to be specified for the subinfo
parameter and acquirable information
Port portsubinfo The following information about ports can be acquired:
•
HostStorageDomain : Host storage domain
information
•
LUNGroup : LUN group information
•
WWN : WWN information
•
WWNGroup : WWN group information
wwngroupsubinfo You can specify this parameter only when
XP512/XP48 is used. Specify WWNGroup for the
parameter portsubinfo when using this parameter.
The following information about WWW groups set for
the port can be acquired:
•
WWN : WWN information
lungroupsubinfo You can specify this parameter only when
XP512/XP48 is used. Specify LUNGroup for the
parameter portsubinfo when using this parameter.
The following information about LUN groups set for the
port can be acquired:
•
Path : Path information
pathsubinfo You can specify this parameter only when
XP512/XP48 is used. Specify LUNGroup for the
parameter portsubinfo when using this parameter.
The following information about paths set for the LUN
group can be acquired:
•
WWN : WWN information
•
WWNGroup : WWN group information
PortController controllersubinfo This parameter is valid for the NAS configuration.
•
IPAddress : IP address of the port controller
•
PairedPortController : Information of the
paired port controller
ReplicationInfo replicationsubinfo •
LogicalUnit : Information about logical units for
replication