10-20 items output when instance is lungroup – HP XP Command View Advanced Edition Software User Manual
Page 250
Command line interface commands
250
Table 4-120
Items output when instance is LogicalUnit
Attribute Description
consumedCapacityInK
B
Space used on the THP volume (KB)
One of the following values is output for XP24000/XP20000:
When the logical unit consists of THP volumes: space used on the THP
volumes
NOTE:
When the THP volumes are not assigned to a THP pool, 0 is displayed.
NOTE:
When the operator is a partitioned storage manager, -1 is output.
NOTE:
Volume capacity is allocated from the logical unit in units of tens of
megabytes, so, when the usage rate of the logical unit reaches 100%, the value of
consumedCapacityInKB
might not match the value of capacityInKB.
NOTE:
This value might increase significantly depending on the combination of
the file system and the OS of the host that is using the THP volumes. For details,
see the THP documentation.
When the logical unit does not consist of THP volumes: the same value as
capacityInKB
-1
is output for other storage subsystems.
thpPoolID
Pool ID of the XP Thin Provisioning Software
One of the following values is output for XP24000/XP20000:
When the logical unit consists of THP volumes: pool ID of the THP pool to
which the THP volumes are assigned
NOTE:
When the THP volumes are not assigned to a THP pool, -1 is displayed.
NOTE:
When the operator is a partitioned storage administrator, -1 is displayed.
When the logical unit consists of THP pool volumes: pool ID of the THP pool
that contains the THP pool volumes
NOTE:
When the operator is a partitioned storage administrator, -1 is displayed.
-1
is output for other volumes.
-1
is output for other storage subsystems.
threshold
Usage rate threshold of the virtual volumes
One of the following values is output for XP24000/XP20000:
When the logical unit consists of THP volumes: usage rate threshold value of
the THP volumes
NOTE:
When the THP volumes are not assigned to a THP pool, -1 is displayed.
NOTE:
When the operator is a partitioned storage administrator, -1 is displayed.
-1
is output for volumes other than THP volumes.
-1
is output for other storage subsystems.
tcaPoolID
Pool ID of XP Continuous Access Asynchronous Software
-1
is output for XP24000/XP20000, XP12000/XP10000/SVS200, XP1024/XP128,
and XP512/XP48.
4-10-20 Items output when instance is LUNGroup
The LUNGroup instance is output when the following commands are executed:
•
AddLunGroup
(see section
)