HP LaserJet 3150 All-in-One Printer series - Manual (Page 110)

108 7 Managing Basic Features EN
Enabling special dialing symbols
If you need access to special dialing symbols such as hook flash, use
this procedure to enable them. You generally do not need these
symbols. The default is Off.
To enable special dialing symbols
1 Press E NTER /M ENU .
2 Use the < and > keys to select FAX SETTINGS and press
E NTER /M ENU .
3 Press the > key once to select OUTGOING FAXES and press
E NTER /M ENU .
4 Use the < and > keys to select DIAL SYMBOLS and press
E NTER /M ENU .
5 Use the < and > keys to select ENABLED or DISABLED and press
E NTER /M ENU .
6 Press S TOP /C LEAR to exit the Menu settings.
Using special dialing symbols
After enabling special dialing symbols, you can use them when
dialing a fax number or entering a fax number or calling card number
for a one-touch key, speed-dial code, or group-dial code.
To use special dial symbols
1 When you reach the position in the fax number where you need
the symbol, press
* .
2 Use the < and > keys to scroll through the symbols until you reach
the one you need and press E NTER /M ENU .
3 The special symbol is entered into the fax number. It will be
represented by a letter or punctuation mark.
- Or -
Depending on the symbol you chose, you may be asked to make
additional choices before the symbol is entered into the fax
number.