HP LaserJet 3150 All-in-One Printer series - Manual (Page 123)

EN Setting send fax options 121
Changing the time and date
You or your computer already entered this information when you first
set up the HP LaserJet 3150 product. You only need this procedure to
change the date or time.
The date and time information is included in the header that prints at
the top of faxes you send. In the United States, setting the time
and date is a legal requirement. The time and date also show on
the control panel display when the HP LaserJet 3150 product is idle.
To change the time and date
1 Press E NTER /M ENU .
2 Use the < and > keys to select TIME/DATE, HEADER and press
E NTER /M ENU .
3 Press E NTER /M ENU to select TIME/DATE .
4 Use the < and > keys to select a 12-hour or 24-hour clock and
press E NTER /M ENU .
5 Enter the current time using the numeric keys.
6 If you chose the 24-hour clock, press E NTER /M ENU .
- Or -
If you need to change the AM or PM designation, use the
< and >
keys to select the correct one, and then press E NTER /M ENU .
7 Enter the current date using the numeric keys. Make sure to enter
the month and day using both digits, such as “05” for May and
then press
E NTER /M ENU .
Note If you enter a number incorrectly, press B ACK S PACE until you reach the
entry. Then re-enter the number.
8 Press S TOP /C LEAR to exit the Menu settings.