HP LaserJet 3150 All-in-One Printer series - Manual (Page 18)

16 2 Faxing EN
Selecting and loading items
Follow the instructions below for selecting, orienting, and sending
paper faxes.
Selecting items for faxing, copying, and
scanning
The HP LaserJet 3150 product can scan various sizes of items from 2
by 3.5 inches (51 by 89 mm) (the size of a business card) to 8.5 by 14
inches (215 by 356 mm). The product can fax and copy items, from 2
by 3.5 inches (51 by 89 mm) to 8.5 by 39 inches (215 by 991 mm). To
fax or copy items longer than 39 inches, see “Sending long pages” on
page 30.
The product accepts bond papers, onionskin papers, newspaper
pages, magazine pages, recycled papers, transparencies, items in
carrier sheets, and photographs in carrier sheets. Also, coarser
papers scan more easily. While slick papers go through the
HP LaserJet 3150 product, it may be more difficult. For best results,
feed slick sheets one at a time.
You should not put anything in the HP LaserJet 3150 product that
could get stuck in or damage the feed mechanism. Observe the
following to minimize the possibility of jams.
● Remove self-stick notes.
● Remove staples and paper clips.
● Straighten any curls or wrinkles from documents before putting
them into the document feeder tray.
● Do not send any document with glue, correction fluid, or wet ink
on it.
● Do not send gum-backed paper or labels.
● Place documents with tears, perforations, or punch holes in a
carrier sheet, which you can buy or make (see below).
● Avoid multiple copy forms.