HP LaserJet 3150 All-in-One Printer series - Manual (Page 31)

EN Sending faxes from the product 29
Redialing manually
By factory default, the HP LaserJet 3150 product automatically
redials busy numbers at specified intervals up to two times in
Malaysia, three times in New Zealand, and five times in all other
countries/regions. It does not redial if there is no answer.
If you want to send another document to the last fax number dialed,
use this procedure to redial. If you are trying to resend the same
document you sent the first time, you will probably want to wait until
the automatic redials have stopped or you have stopped them
yourself. Otherwise, the recipient may get the fax twice: once from
this manual redial attempt and once from one of the automatic redial
attempts.
Note To stop the current redial attempt for a fax, see “Canceling the current
fax job” on page 33. To cancel all pending, automatic redial attempts
for a fax, see “Canceling a fax job using Job Status” on page 33.
Note To change the number of redials or time between redials, see “Adjusting
number of redials” on page 123 and “Adjusting time between redials”
on page 124.
To redial manually
1 Load the document into the document feeder tray.
2 Press R EDIAL /P AUSE .
3 Press S TART . The HP LaserJet 3150 product redials the last
number and attempts to send the fax.