HP LaserJet 3150 All-in-One Printer series - Manual (Page 215)

EN Cleaning the scanner path 213
Cleaning the scanner path
You may need to clean parts of the
scanner if the ink on items you are
scanning can be smudged with your
hand or they have excessive amounts of
dust or dirt on them. You may also need
to clean these parts if there are smudges
or other marks on documents or scans of
documents.
WARNING!
Before cleaning the HP LaserJet 3150
product, disconnect it from the power
source.
1 Open the document release door.
2 If the long, white strip on the inside
of the document release door is
dirty, clean it with a dry cotton swab.
If there is still something on the
strip, dab a swab in a small amount
of isopropyl alcohol and gently
clean the strip.
WARNING!
Alcohol is flammable. Keep it away from
open flame. Allow alcohol to dry
completely before closing the printer and
plugging in the power cord.
CAUTION
If you must use alcohol, only use a very
small amount. Exposing internal parts to
dripping alcohol can damage them.
3 If the long strip of glass opposite the
long, white strip is dirty, clean it with
a dry cotton swab. If there is still
something on the glass strip, dab a
swab in a small amount of isopropyl
alcohol and gently clean the glass.
1
2
3