HP Multi-Site Traffic Director sa9200 - Manual (Page 101)

C H A P T E R 6 System Commands
95
System
Commands
Config Sys Commands
Command Description
config sys Changes the prompt level to the System Config branch.
info
NOTE: The default route
is the same as the default
gateway.
Displays the SA9200’s current system information.
For example:
System Id:
MAC Address: 0:90:27:73:f0:e4
IP Address: 10.1.10.227
Netmask: 255.255.0.0
Broadcast: 10.1.255.255
Default Route: 10.1.1.1
Nameservers: 10.1.1.10
Domain name: mysite-ex.com
logs display Displays the contents of the specified log file.
Syntax:
config sys logs display
<all|dns|ntp|system|monitor|stats>
where:
all - displays all log messages
dns - displays DNS activity and health monitor information on
this SA9200.
ntp - displays ntp messages
system - displays system messages
monitor - displays monitoring messages
stats - displays statistical information
logs display-old Displays the contents of the old log file.
Syntax:
config sys logs display-old
<all|dns|ntp|system|monitor|stats>
Config Sys Commands