HP Multi-Site Traffic Director sa9200 User Manual
Page 65
C H A P T E R 5
Accessing the Boot Monitor
59
dir
Displays the list of saved boot configuration files.
Example:
monitor>dir
File name
-----------
*default.cfg
dhcp
Enables or disables the use of DHCP by the SA9200. When DHCP is
enabled, the SA9200 receives its configuration parameters from the
DHCP server at startup. When DHCP is disabled, the SA9200 ignores
the DHCP server, and so must be manually configured at startup.
Respond to the prompt with
y
to enable, respond with n to disable.
DHCP is disabled by default.
Example:
monitor>dhcp
Do you wish to use DHCP? [n]--->y
Press Enter to accept the default, n to disable DHCP, or enter y, then
press Enter to enable.
dns
Specifies the domain and (optionally) nameserver(s). The SA9200
prompts you for the required information.
Syntax:
monitor>dns
Example:
monitor>dns
Enter domain ("-" to delete)
[somedomain.com] --->somedomain.com
Primary Name Server (<return> to end)
[209.218.240.1] --->209.218.240.1
Secondary Name Server (<return> to end "-" to delete)
[] --->
Command
Description
Boot Monitor Command Reference