HP Multi-Site Traffic Director sa9200 - Manual (Page 111)

C H A P T E R 6 DNS Commands
105
Config DNS Agents Commands
Command Description
config dns agents Changes the prompt to the config dns agents command level.
info Displays the configuration information of all agents in the
SA9200. Each SA9200 may have up to 16 agents configured.
For example:
Agent: 10.1.2.8
State: Enabled Metrics Interval: 30
Metrics Timeout: 15
Agent IP: 10.1.2.8 Agent Port: 1999
Primary Flash Src: Not Defined
Primary Flash Port: 0
Backup Flash Src: Not Defined
Backup Flash Port: 0
stats Displays the statistical information of each agent configured
under this SA9200.
For example:
Agent: load1 (Version 45.0.0.0)
State: Connected CPU Util: 5% Connections/Sec: 0
Agent: load2 (Version Unknown)
State: Connected CPU Util: 0% Connections/Sec: 0
Information displayed:
• Agent IP: (IP address of load balancer and version number)
• Current State: (e.g., Connected or Disconnected)
• CPU Utilization: (Percentage of CPU usage)
• Connections Per Second
Config DNS Agents Commands