HP Multi-Site Traffic Director sa9200 - Manual (Page 64)

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
58
boot
NOTE: User-
entered names and
IP addresses in the
example are for
illustrative purposes
only. The
appropriate values
for your installation
may vary.
Boots the SA9200 using a specified configuration.
Example:
monitor>boot
Current active configuration
----------------------------
Product: HP_SA9200
Version: 3.0
Patch Level: 0.0
Build: D18
----------------------------
Current time: Fri Mar 31 14:04:56
Current Config: default.cfg
Hostname: www
Using DHCP: No
IP Address: 10.1.1.11
Netmask: 255.255.255.0
Default Route: 10.1.1.1
Domain: xyz-ex.com
Primary nameserver: 10.1.1.101
NTP: Enabled
Servers: 10.1.1.2
NIC setup: auto
Autoboot: Enabled
Boot timeout: 5 (seconds)
Boot current configuration? [y]
Please stand by, the system is being rebooted.
delete Deletes the specified configuration file from SA9200.
Example:
monitor>delete
Enter the configuration file to delete [] --->
filename.cfg
Command Description
Boot Monitor Command Reference