HP Multi-Site Traffic Director sa9200 - Manual (Page 110)

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide
104
status If the SA9200 is a primary, Displays the secondary SA9200(s) to
which it is currently connected.
If the SA9200 is a secondary, Displays the connection status to its
primary.
log
NOTE: Enabling logging
may reduce the speed of
DNS resolutions.
Enables or disables logging. When logging is enabled, the DNS
server logs details of the incoming queries, the balancing process
for VIP selection, and the query response to the log file. Default:
disabled.
Syntax:
config dns log [enable|disable]
primary
NOTE: Each primary can
have simultaneous
connections to as many as
four secondary SA9200s.
Designate the device as the primary SA9200. Connection to any
unit previously designated as primary is lost when this command
is executed. Default: enabled.
Syntax:
config dns primary [enable|disable]
where:
enable designates the SA9200 as the primary.
secondary
NOTE: Upon successful
connection to the primary,
all commands under config
dns zones become
unavailable to the
secondary. Primary and
secondary configurations
are the same and are
transferred to the
secondary after every
“commit” within the
primary.
Designates this unit as a secondary SA9200.
Syntax:
config dns secondary <primary ip address>
where:
primary ip address is the address of the primary SA9200
to which the current unit is subordinated as a secondary.
Command Description
Config DNS Commands