HP Multi-Site Traffic Director sa9200 - Manual (Page 67)

C H A P T E R 5 Accessing the Boot Monitor
61
help Lists all Boot Monitor commands or optionally displays syntax for a
specified command.
Example:
monitor>help
autoboot Enable or disable autoboot
boot Boot saved configuration
delete Delete a saved configuration file
dhcp Use DHCP to configure system
dir Directory of saved config files
dns Configure domain and name server(s)
factory_reset Reset system to factory defaults
halt Use to halt SA9200 system
help Show list of available commands
host Set host name
info Show system status
ip Set IP address
load Load a specified configuration
netmask Set netmask
nic Configure network interface card
route Set default route
save Save the current configuration
setdate Set the real-time clock
setup Configure unit
show Show saved configuration info
version Display software version info
Command Description
Boot Monitor Command Reference